自动式蒸汽调节阀
电动式温度自动调节阀
Electric Automalic Temperature Regulating Valve

自动式蒸汽调节阀
Self Aeting Temperature Regulating Valve

概述 Introduction

蒸气温度调节器(以下简称蒸汽调温器)是由感温器和蒸汽(热水、热油)调节阀两个部套组合构成,根据被加热介质(水或油)的温度变化自动调节加热介质(蒸汽、热水、热油)的流量,广泛应用于各类船用、陆用加热装置的蒸汽调节。

This steam temperature controller is composed of two components of temperature sensor and steam(hot water,hot oil)control valve. According to the change of temperature of the medium(water or oil)being heated, it makes the heated medium(steam, hot water, hot oil) flow rate automatically adjusting. It is widely used in steam adjusting of heating installations both marine and onshore.

基本参数 Basic Parameters

双温包补偿式感温器 Double-probe compensation

型号
Model
公称感温包容积比
Nominal Volume ratio of probe V(一)/V(二) V(first)/V(second)
感温包(一)
Probe(second)
感温包(二)
Probe(second)
反应时间S
Response time
感温包长度mm
Length of probe
柱塞最大提升度mm
Max lifting height of plunger
行程变化率
mm/℃
Stroke change rate
适用温度范围℃
Temperature adjusting range
行程变化率
mm/℃
Stroke change rate
适用温度范围℃
Temperature adjusting range
S4-0.5A 0.35/1 0.5 0~120 0.175 20~30 ≤25 420 12
S4-0.5B 0.5/1 0.25
S4-0.5C 0.7/1 0.35
S4-0.5D 1/1 0.5
S4-0.5E 1.4/1 0.7

说明Note:

1、毛细管标准长度为-3米,需要其他长度,应在订货时说明,最大长度为20米。 
The standard capillary tube length is three (3) meters, other lengts up to twenty (20) meters are available upon request specified in your order.
2、反应时间系指在液体介质内。 
The response time means the time responsed in liquid medium.

单温包感温器 Single-probe temperature sensor

型号
Model
行程变化率mm/℃
Stroke changerate
适用温度范围℃
Temperature adjusting range
反应时间S
Response time
感温包长度mm
Length of probe
柱塞最大提升度mm
Max lifting height of plunger
D4-0.3 0.25 0~160 ≤25 420 12
BD4-0.3 150
D4-0.5 0.5 0~120.40~160 420
BD4-0.5 300
D4-1.0 1 0~60.30~90
60~120
420
BD4-1.0 400

说明Note:

1、毛细管标准长度为-3米,需要其他长度,应在订货时说明,最大长度为20米。 
The standard capillary tube length is three (3) meters, other lengts up to twenty (20) meters are available upon request specified in your order.
2、反应时间系指在液体介质内。 
The response time means the time responsed in liquid medium.

蒸汽调节阀 Steam control valve

型号
Model
公称通径mm
Nominal bore
适用介质
Using medium
热源介质 材料
蒸汽 Steam 热水 Hot water

额定蒸汽流量kg/h
Rated steam flow rate

最大允许压差MPa(kgf/cm2)
Max allowable prssure differense

额定流量kg/h
Rated flow rate

最大允许压差MPa(kgf/cm2)
Max allowable prssure differense
1F1.6-15 15 蒸汽热水
Steam hot water
110 1.764 0.85 1.59 铸铁
Castiron
铸钢
Cast steel
不锈钢
Stainless Steel
1F1.6-20 20 200 0.735 1.54 0.686
1F1.6-25 25 320 0.440 2.26 0.441
1F1.6-32 32 520 3.725 4.00 3.629
2F1.6-40 40 800 2.157 6.00 1.569
2F1.6-50 50 1400 1.863 9.5 1.529
2F1.6-65 65 2000 0.980 15.2 0.980
2F1.6-80 80 3200 0.784 24 0.746
2F1.6-100 100 5000 0.588 37.00 0.530
2F1.6-125 125 7812 0.3 58 0.3
2F1.6-150 150 11250 0.19 83 0.19

三通热水调节阀 3 way hot water control valve

型号
Model
公称通径
Nominal bore
适用介质
Using medium
额定热水流量t/h
Rated hot water flow rate
材料
Material
3F1.6-2.5 25 热水
(hot water)
2.26 铸铁
铸钢
不锈钢
castiron
cast steel
stainless steel
3F1.6-32 32 4.00
3F1.6-40 40 6.00
3F1.6-50 50 9.5
3F1.6-65 65 15.5
3F1.6-80 80 24
3F1.6-100 100 37

型号表示方法 The model indicating method is listed below

蒸汽调节阀 Steam control valve:

三通热水调节阀 Three (3) way hot water control valve
3 F 1.6 - 100 
100 公称通径mm Nominal bore(in mm)
1.6 公称压力MPa Nominal pressure (in Mpa) 
F 连接方式:F-法兰 Connection method:F-flange connection
3 三通 Three (3) way

外形和安装尺寸 Outline and installation dimensions

双温包补偿式感温调节器外形和安装尺寸
The outline and installation dimensions of double-probe compensation temperature controller
螺旋形单温包感温调节器外形和安装尺寸
The outline and installation dimensions of spiral single-probe temperature controller

棒形单温包感温调节器外形和安装尺寸
The outline and installation dimensions of rod single-probe temperature controller

型号
Model
L E G G
BD4-0.3 150 22 ZG1" M36×2
BD4-0.5 300 22 ZG1" M36×2
BD4-1.0 400 23 ZG1" M36×2
BD8-1.0 710 25 G1 1/4" M36×2

1F-1.6型蒸汽调节阀外形和安装尺寸
The outline and installation dimensions of 1F-1.6 steam control valve

2F-1.6型蒸汽调节阀外形和安装尺寸
The outline and installation dimensions of 2F-1.6 steam control valve

3F1.6-25~50热水调节阀外形和安装尺寸
The outline and installation dimensions of 3F1.6-25~50 hot water control valve

图片
海靡订货须知:(国家标准)
一、A:产品名称、型号、公称通径B:介质及温度、压力范围C:是否有附件、交货期、特殊要求等以便我们的为您正确选型。
二、若已经由设计单位选定我公司的阀门型号,请您根据阀门参数直接与我们销售中心订购。
三、当您使用的场合非常重要或环境比较复杂时,请您提供设计图纸和详细参数,我们的工程师专家会专心为您审核与分析。我们可以为您提供专业的解决方案,包括设计、定做、成套、运行、服务。我们一直致力于阀门行业领域的领导者,为您提供最新的阀门知识、最好的服务、最佳的技术顾问。
感谢您访问我们的网站【www.haimivalve.com】,如有任何疑问,您可以致电给我们,我们一定会尽心尽力为您提供优质的服务。本厂专业提供船用蝶阀、船用闸阀、船用止回阀、船用调节阀、船用减压阀、船用呼吸阀、高速透气阀、船用快关阀、船用自闭阀、船用旋塞阀、船用消防阀、船用通海阀、船用防浪阀、船用滤器、船用空气帽、船用球阀、船用截止阀、船用截止止回阀、船用阀组、船用截止阀箱、船用针型阀、船用电磁阀、船用隔膜阀、船用压力表阀等各类阀门。
图片
脚注信息